RS 510/23 KNX Binary Output, 2 x AC 230 V, 10 A (resistive load)

Description

Rated contact frequency: 50/60 Hz
2 floating relay contacts
Contact rated current according to DIN EN 60669-1: 10 A (resistive load)
Bus-powered electronics
Integrated bus coupling unit, bus connection via bus terminal
Type of protection: IP 20
Rated contact voltage AC 230 V
Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 … 2.5 mm²
With bus connection module
Modular installation device for mounting in AP 118 automation module box or AP 641 room control box

Additional functionalities GAMMA

For each output:

Selectable operating mode (normal mode/time switch mode)
Selectable relay mode (NO contact/NC contact)
Status object as optional addition
Variable On and Off delay times
Selectable logic operation (AND/OR) of two communication objects
Selectable switching state at bus voltage failure and recovery
Optional addition of night mode object for time-limited switching On of the output (and hence the illumination) at night

Variable On period at night or time switch mode
Selectable post-triggering of the On period (On period extension) in time switch mode
Selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) at night or in time switch mode
Selectable function:

Including additional communication object for manual override of an output
Forced control, including additional communication object for switching an output on or off in forced mode
Counting of operating hours and with threshold monitoring of the operating hours
Counting of load cycles and with threshold monitoring of the load cycles

Integrated 8-bit scene control and linking of each output into up to 8 scenes

Additional info

The AP 641 room control box and AP 118 automation module box must be ordered separately.
See chapter Modular Installation System – Room control box – Module boxes.